What is a glue compressor?

What is a glue compressor?

Glue compressor is an analogue SSL bus compression emulator and is based on the classic bus compressor from a famous 80's mixing console. It works to tighten up instruments or to glue elements together in a mix, as opposed to compressing individual tracks – not that you can't use it for that purpose!

What is mix glue?

You'll hear the term “glue” thrown around a lot in discussions about modern music mixing. Generally, it's used to describe a type of processing that is usually applied to the master buss or sub-groups that helps the individual elements sound as if they exist within the same sonic context.

How does Ableton erosion work?

Ableton's EROSION is one of the stock audio effects included in Live that is capable of degrading an input signal by modulating a short delay with filtered noise or a sine wave. This process adds noisy artifacts or aliasing and down-sampling digital distortions.

What is Ableton corpus?

Corpus is a virtual resonator or soundbox with a life of its own. Independent of Collision, you can use Corpus to add physical modeling characteristics to audio material or place it behind any virtual instrument to create complex resonances.

What is a saturator Ableton?

The Saturator in Ableton Live adds the effect of saturation via a wave-shaping effect, adding characters of grit, punch, or warmth to your sounds. Whether it's subtle saturation or more apparent distortion effect you're going for, Saturator can get you there.

What is a saturator?

A saturator is an audio effect that applies non-linear compression and distortion to its input audio signal. Saturation can occur through various different means, but it's common for music producers to use tape saturators to apply saturation to their songs.

What is a saturator plugin?

Tape saturation plugins emulate the sound of audio recorded through tape machines. They introduce odd order harmonics, subtle compression, and non-linear shifts in frequency response. Tape saturation also rolls off high-end frequencies and creates a small boost in the lows.

What does a compressor do?

Simply, a compressor is used to compress a sound's dynamic range. That is, to make the louder and quieter parts of the sound's performance closer to each other in level. It does this in one of two ways. In “downward compression,” the compressor attenuates the signal when it gets too loud.

What does auto filter do Ableton?

The Auto Filter effect provides classic analog filter emulation. It can be modulated by an envelope follower and/or an LFO to create moving filter effects. The envelope follower can track either the filtered signal or an external sidechain source. ... This is available for all of the filter types.

Does Ableton Live Lite have EQ Eight?

Re: EQ Eight + more Ableton live lite is even more stripped down than Intro. Neither versions have eq8. Ableton live lite comes with almost every midi controller out there now.

How do you increase bass in Ableton?

Use EQ Eight to select the region of frequencies you want (for example a region of low frequencies, aka bass), with the type of curve you want to apply and then boost or cut the volume of that region. You can also use EQ Three, but it is much more limited in options.

How do I make my bass more punchy?

Re: How do I give the bass more punch and power?

  1. Gain staging.
  2. Counter-intuitively turn down the bass.
  3. EQ, also not on the fundamental region.
  4. Compression (Gentle!)
  5. Buss compression with the side-chain filtering out the bass.
  6. Parallel Compression.
  7. Make sub region mono as early in the signal path as possible.

How can I make my bass stronger?

To summarize:

  1. Limiting your bass – use a limiter or soft clipper on your bass to make the volume even and more powerful.
  2. Saturation and distortion – use these two effects to increase power and make the sound more pronounced.

How do I make my bass sound deeper?

For deep bass, you're going to want to use a low-pass filter to cut out the higher frequencies of the bass notes, and then shape it with the filter and amplitude envelopes. Using the low-pass filter cutoff, we cut the higher frequencies out. Next, played with the filter resonance to add some depth and color.

Why are 808s called 808s?

If you're into hip-hop and pop, you've probably heard “808” at some point. That's a reference to the iconic Roland TR-808, a drum machine created by Ikutaro Kakehashi in 1980. ... The machine particularly stood out for its powerful bass drum sound.

What Hz is deep bass?

40 Hz

What Hz is bad?

Low frequency sounds can be harmful Human beings are normally able to detect sounds in the range of Hz and it is well known that sounds within this range can damage the hearing. However, sounds under the frequency of 20 Hz can also affect the ear even though we are unable to hear them.

How do I make my subs hit the hardest?

How to Make Subwoofers Hit Harder

  1. Choose the correct amplifier for the subwoofer. Every type of subwoofer requires a certain power output by an amplifier. ...
  2. Install the subwoofer in a bandpass box. ...
  3. Adjust the settings on the amplifier and stereo unit to accommodate the subwoofer.

Is higher Hz better sound?

This measurement of cycles per second is expressed in Hertz (Hz), with a higher Hz representing higher frequency sound. Low-frequency sounds are 500 Hz or lower while high-frequency waves are above 2000 Hz. ... People with hearing loss usually have trouble hearing sounds in the higher frequency range.

Can low frequency sound kill you?

One of the characteristics of low-frequency sound is that it can travel across long distances. ... Even if you can't see it, hear it or feel it, sound waves can still make you sick or kill you. Each person reacts differently to the same sound, so if no one else feels it, it may just be you.

What is Hz equal to?

Frequency is the rate at which current changes direction per second. It is measured in hertz (Hz), an international unit of measure where 1 hertz is equal to 1 cycle per second. Hertz (Hz) = One hertz is equal to one cycle per second. Cycle = One complete wave of alternating current or voltage.

Is 20 Hz a good bass?

A 20-120 Hz rating is best for bass in most subwoofers. The lower the Hz, the more is the bass you can get. Some of the best subwoofers in the market have this Hz range. ... A subwoofer that operates lower than this audible range will provide physical vibrations instead of actual sounds.

Is 30 Hz low enough?

A sub with a 3db just below 30 Hz is perfectly adequate for most purposes. ... That last half octave from 30 Hz to 20 Hz is the most expendable if funds are tight.

What should I set my HPF and LPF to?

You usually set the HPF with a steep slope say 24db/octave because you are trying to protect the sub from damage and a 12-18db/octave on the LPF because you want it to kinda "blend" in with your mids. The steeper the slope (db/octave) the less your sub will creep into the neighboring frequencies.

What subwoofer has the deepest bass?

Below are the top 10 best car subwoofers for deep bass that we recommend to help you get started.

  • 1) JL Audio 12W7AE-3 12″ Subwoofer.
  • 2) Orion HCCA12 12″ Subwoofer.
  • 3) MTX Audio Terminator TNE212D Dual 12″ Subwoofers.
  • 4) Rockford Fosgate P300-12 Subwoofer.
  • 5) JL Audio 10TW3-D4 10″ Shallow Mount Subwoofer.