How is concrete work measured?

How is concrete work measured?


  1. Determine how thick you want the concrete.
  2. Measure the length and width that you'd like to cover.
  3. Multiply the length by the width to determine square footage.
  4. Convert the thickness from inches to feet.
  5. Multiply the thickness in feet by the square footage to determine cubic feet.

Is code for measurement of RCC?

The method of measurement of concrete work in roads, piling, wells and tunneling is covered respectively in J~: 1200 ( Part XVII ir, IS: 1200 ( Part XXIII ):, IS: 1200 ( Part XXIV)I and IS: 1200 (Part XXV )~.

Is 1200 mode of measurement painting?

Method of measurement of painting of building surfaces are covered in IS : 1200 ( Part 13 ). on the basis ofdetailed description of items stated in this standard. consistent. and generally in sequence of length, width and height or depth or thickness.

Is code formwork steel?

3 Steel Steel sheet plates conforming to IS 2062 or IS 8500 or IS 1977 may be used for form and form lining and rolled sections and tubes conforming to IS 2062 or IS 8500 or IS 116 1 may be used for steel forming and bracings.

Is 1200 mode of measurement for brickwork?

general brickwork and unless otherwise stated reinforcement shall be measured separately [see IS : 1200 (Part VIII )-1975* 1. 11.

Is 1200 Part 13 A method of measurement?

IS 1200-13: Method of measurement of building and civil engineering works, Part 13: Whitewashing, colour washing, distempering and painting of building surfaces.

What is the unit of brickwork?

Linear metre The normal unit for the measure- ment of brickwork is the square metre, stating the thickness of the brickwork in the description of the item. In no case is it reduced to one brick thick. When the brickwork exceeds 700 mm or three bricks thick the unit of measurement becomes the cubic metre.

Is code for mode of measurement?

Mode of Measurement as per IS 1200 (PART-1) | Measurement of Building work | BY CIVIL GURUJI.

What are the modes of measurement?

There are the three modes of measurement:

  • Primary Measurement.
  • Secondary Measurement.
  • Tertiary Measurement.