How much does it cost to put in a fiberglass pool?

How much does it cost to put in a fiberglass pool?

The average cost to install a fiberglass swimming pool is $46,000 with most homeowners spending between $23,400 for a 10x20 to $59,900 for a 16x32 pool. The additional cost of pool ownership for basic maintenance, increased utilities, and repairs add close to $375 per year.

What is the downside of fiberglass pools?

Poor Quality. Fiberglass pools with a thin shell or pools that aren't made level to begin with will have problems even when they're installed properly. A thin shell can warp and take on a shape that's different from its original shape -- and different than the hole was designed for.

How long do Fiberglass pools last?

25 years

Can I install my own fiberglass pool?

If you're just starting your research, you're probably thinking: "Fiberglass pools are conceptually easy to install. You just dig a hole and set it in, right?" ... However, fiberglass pools are a perfect Do-It-Yourself project for anyone with basic excavation and plumbing experience—and, of course, time.

Do fiberglass pools look cheap?

When the patio around the pool is well designed, the finished product is truly a thing of beauty. So yes, fiberglass pools can look cheap, especially older ones, but they don't have to. When properly built and properly installed, a fiberglass pool will be a thing of beauty.

Can fiberglass pools be heated?

Yes, people have a heater, but who wants to spend that kind of money heating one of these pools? On the other hand, fiberglass pools are very easy to heat, and once the sun heats it up a bit, all it takes is an hour or two to get the temp just perfect on a cool evening costing less than 10 dollars.

Why do Fiberglass pools crack?

Gelcoat spider cracks in fiberglass pools are a result of pressure on a given point of the pool shell that exceeds the gelcoat's ability to flex. This pressure could be a result of improper shipping, improper manufacturing, or improper installation.

Can I buy a fiberglass pool shell?

Fiberglass Swimming Pool Shells Today, fiberglass pools are built as one complete shell with complete structural integrity and strength. Fast forward to today, and many homeowners are choosing fiberglass swimming pool shells as their choice for a new pool.

Can you have lights in a fiberglass pool?

Fiber-optic lights are one choice for fiberglass pool lighting that has become very popular. These lights can be installed underwater or above the water level, and are low-maintenance. The light fixtures are fitted into light niches on the sides of the pool as in standard pool lighting.

Are LED pool lights worth it?

Thanks to a much lower average wattage, an LED pool light costs only pennies a day to operate, while an incandescent bulb can cost up to $1 a day. Think of each LED pool light as an investment. You'll likely pay a bit more up front, but you'll quickly recoup what you spend thanks to the energy savings.

How many lights are needed in a pool?

The number of lights you need depends on the size of your swimming pool. 15' x 30' pools only require one light. 20' x 40' pools require two lights. 20' x 42' pools and up require three or more lights.

Can I add lights to my inground pool?

Not only do they make your pool available to use at night, but they can transform your whole backyard into a beautiful oasis. In addition to pool lighting, you can also add lights to your hot tub and laminar jets, as well as any other water feature, for the most dramatic effects.

Where should pool lights be placed?

Place lights at a uniform depth, between 9-12 inches below the waterline, throughout the pool. Possible exceptions would be if the lights need to be placed on a step or bench or extremely deep pools (see Pro Tip). Lights should be positioned 4 inches beneath the waterline.

Are LED pool lights as bright as incandescent?

“Shine Bright Like a (LED) Lightbulb” – Brighter Lighting These LED bulbs are way brighter than regular light bulbs. Light is often measured in lumens. LED bulbs can produce 1400-1750 lumens when lit. And while some incandescent bulbs match that, they usually produce about 500 lumens.

Can you put LED lights in a pool?

RGB LED strip lights are a great way to add a pop of color to your above-ground pool. These low-voltage LED lights can be applied to the inside rim of your pool or around your pool deck.

Do you have to drain pool to replace light?

It is not necessary to get into the pool or to partially drain the pool to replace the light bulb.

How are pool lights installed?

When the pool water level reaches the light, the light ring and gasket can be installed. Then the vinyl inside the light ring is cut out, and the lamp can be installed into the light niche, with the light cord running out the back of the niche, to the power junction box.

How much do LED pool lights cost?

As this is being written, a full sized LED pool light usually cost between $450 and $650 installed. If you go for the smaller LED lights you're looking at $300 to $500 installed. When you have full-size incandescent pool lights they are in the range of $450 to $650.

Is a pool worth the money?

Not only does a pool increase your social worth, but it can also increase the value of your home. But probably not as much as you think. According to HouseLogic, there's no real guarantee that you'll make your money back. In fact, adding a swimming pool may only increase your home's value by 7%.

Are pool lights worth it?

An LED light will save you roughly 75% on your energy usage compared to a comparable incandescent light. REMEMBER, that LED pool lights cost more, on average, than a simple incandescent light so your cost savings will not start till you recoup the additional money that you spent on the LED lights.

Can I use a regular light bulb in my pool?

@OP, any 120VAC LED bulb should work. Just make sure it will fit your existing light fixture. Also, it is a MUST to replace the gasket every time you open the fixture and/or replacing the bulb. Didn't notice our light in the Spa has a bit of water in it until the water was drained.

Do LED pool lights get hot?

The Most Energy-Efficient Lighting Available An LED is a small semi-conductor device that converts electrical energy directly into light. Since there is no filament, an LED does not heat up the way an incandescent bulb does, which wastes up to 80% of the electricity routed to it to produce heat rather than light.

How do you know if a pool light is bad?

If your light bulb is in good condition, it should read about 3-20 ohms. A reading of high ohms or “OFL” (overflow, open, no continuity, infinite ohms) usually indicates a bad bulb, though it also could be caused by a bad wire or fixture.

How do you know if your pool light is 12V or 120V?

Look to see if you have a transformer wired before the light. If you have transformer then you have a 12V light. ... Check the back of the light housing where the cord connects into the light, there will be a label specification of your light. The brightness of a 12V and 120V will be the same.

Can a 12 volt pool light kill you?

Because these lights operate at a very low voltage, they are less inherently dangerous when taken on their own. Some believe the 120 volts generated by an incandescent light can introduce a fatal charge, whereas the power from low-voltage lights, generally 12 volts, can injure but not kill.

How much is a pool light bulb?

A pool light bulb retails for about $30-40. A new pool light gasket for the fixture is about $25. Labor for the repair would be $100-150.

Are all inground pool lights the same size?

Not all pool lights have the same depth and diameter. ... Universal ColorLogic pool lights are 12V Universal ColorLogic lights are available only in 12V – they don't make a 120V version. This is another reason, in addition to the all plastic construction, that the Universal Color Logic is able to be UL listed.

What is the best pool light?

Best Inground Pool Lights

  • TOVEENEN LED Pool Light High Brightness White - 120V - 60W - 5400lm. ...
  • LAMPAOUS RGB Multicolor LED Pool Light 120V - 35W. ...
  • TOVEENEN Color-Changing LED Pool Light with 16 light shows - 120V - 35W. ...
  • S. R. Smith LED Pool Light - 50 ft. ...
  • Pentair AquaLuminator Aboveground Light and Water Return.

What is a pool light niche?

The light niche creates a void or space in the pool wall where the fixture attaches from the front side and the light conduit to attaches on the back side. The light conduit is a plastic or copper tube for the electrical supply wire to feed power to the light fixture. It is mostly buried under the deck.

Are inground pool lights universal?

Universal ColorLogic pool lights are 12V This is another reason, in addition to the all plastic construction, that the Universal Color Logic is able to be UL listed. ... In most parts of the country, you can use 120V or 12V pool lights. In some areas, local code requires a 12V pool light to be used.