Can you put a fiberglass pool above ground?

Can you put a fiberglass pool above ground?

A standard above-ground pool is actually not a fiberglass shell at all, but is composed of a steel wall panel and supports. However, fiberglass pools can be customized by manufacturers who will "beef up" the structure by adding more fiberglass and supports that allow more of the shell to be installed above ground.

How much do above ground fiberglass pools cost?

Above ground style fiberglass pools typically range between $20,000 and $62,000, which is higher than many other styles of above ground pools but ultimately lasts longer and requires less maintenance. Lap pools typically cost between $30,000 and $65,000 and saltwater pools hover between $20,000 and $65,000.

How long will a fiberglass pool last?

25 years

How much does a small fiberglass pool cost installed?

The average price of a fiberglass pool (including patio and accessories) is $45,000–$85,000. For comparison, liner pools cost $35,000–$65,000, and concrete pools run $50,000–$100,000.

Do fiberglass pools crack?

Fiberglass pools can craze, or check crack from imprecise manufacturing, or when the surface is not fully supported, like under the steps, or areas where the backfill is eroded. Gel coat can also crack during transport and installation, if it gets bumped around too much.

What is the cheapest way to install an inground pool?

Here are five ways to save money – whether it's a few hundred dollars or thousands.

  1. Choose Vinyl. Vinyl pools are markedly less expensive than either concrete or fiberglass – in terms of initial price tag, anyway. ...
  2. Go with a Smaller Pool. ...
  3. Use a Pool Kit. ...
  4. Install in the Fall. ...
  5. Cut Out the Extras.

Do you need a liner with a fiberglass pool?

Is a fiberglass or vinyl liner pool better for me? Vinyl liner pools typically cost about $10,000 less than fiberglass pools upfront. However, they need the liner replaced every 5–9 years and tend to look cheap. Fiberglass pools are much more durable, need less maintenance, and look classy.

Is a fiberglass pool worth the money?

Fiberglass and concrete tend to cost about the same initially. ... That said, in terms of total cost of ownership, it's worth noting that maintaining a fiberglass pool is generally cheaper. That's because fiberglass is more algae resistant, and therefore could save you money on chemicals over the life of the pool.

What are the pros and cons of fiberglass pools?

PROS AND CONS OF FIBERGLASS POOLS

  • PRO #1: EASY TO MAINTAIN. ...
  • PRO #2: INSTALLATION FLEXIBILITY. ...
  • PRO #3: CUSTOMIZATION. ...
  • PRO #4: ENDURANCE AND LONGEVITY. ...
  • PRO #5: ENVIRONMENTAL AND COST FRIENDLY. ...
  • CON #1: SIZE AND SHAPE LIMITATIONS. ...
  • CON #2: INSTALLATION EXPERTISE.

Are Fiberglass pools too small?

So the answer to the question about fiberglass pools being too small, is no – they are just right. Water fun is water fun, and an extra foot or two of width will have no impact at all on how much fun you will have.

How small is too small for a pool?

While the sizes and dimensions of pools vary, anything that's about 10 foot square or smaller is typically considered a small pool. In terms of depth, three feet is standard for soaking and floating, and four to five feet and above is the best depth for lap pools. From there, it's up to you.

What is a decent size pool?

It's recommended having a depth fewer than six feet to meet most pool needs. For a family of six to eight people, an 18 foot by 36-foot pool is recommended. This should be sufficient to avoid crowding and allow for the playing of games. Rectangle shaped pools look best for this size.

How big of a yard do I need for a pool?

Design Tips Many swimming pool builders recommend the following guide to sizing your pool design: For a small yard of about 150 square meters, build a small pool that's from 20 to 28 square meters. Your swimming pool should only take up about a quarter of your backyard, at most.

Can you negotiate pool prices?

You can do some of the work yourself. Then there's the obvious: You can negotiate a lower price with the pool builder. ... The truth is, you can always try to negotiate a lower price for your pool project, the same way you an try to negotiate over any other sort of custom home improvement project.

How much does a 12x24 inground pool cost?

How much does a 12x24 inground pool cost? A small vinyl liner pool that's about 12 feet wide and 24 feet long might cost you between $25,000 (for the basics) and $35,000 for additional features like heating and fencing.

Can you put a pool in a sloped yard?

Many backyards are flat or virtually flat, making them ideal for an inground pool. ... Pool builders can address most any grade—steep with hills, or downward slope—with a design and/or with modifications to the dig site that make a pool possible in the location.

How do I prepare my yard for an above ground pool?

Proper preparation of your level foundation will yield many summers of fun in the sun.

  1. Choose the best area of your yard to set up your pool. ...
  2. Mark the perimeter of the pool area. ...
  3. Remove all sod and other vegetation from the area. ...
  4. Determine the lowest point of the pool area. ...
  5. Create a wood level.

What should I put under my above ground pool to level?

Yes, you can put a tarp under your above ground pool. However, sand is generally a much better option....These include:

  • Concrete pads.
  • Sand pad.
  • Commercial pads.
  • Solid foam.

How much does it cost to level a yard for a pool?

Slopes. Leveling a slope costs between $1 and $15 per cubic yard of dirt. Basic lawn re-sloping to prevent erosion and fix drainage averages at $1,900 for most homeowners. Leveling a slope, a process called cut and fill, adds to the price because the job will require more labor.

What is the easiest way to level a ground for a pool?

  1. Remove any rocks or debris from the area — you can do this by hand or with a rake.
  2. Take two-by-fours and place them on the site. ...
  3. Place a level (preferably, one that's several feet long so that will cover more of the two-by-four) on top of the two-by-fours, in the center, to see where the ground is not level.

Can you level out a sloped backyard?

Dig into the soil at the highest point of the area that needs to be leveled. Toss the soil downhill, or transport it with a wheelbarrow to bring up the grade, or soil level. Continue excavating soil on the high side of the area and spreading it onto the low side until the grade is about level across the entire area.

How do I level my pool without digging?

Hit a metal rod through the hole securing the boards to the ground. Next, take some sand and pour it over the area with the majority of the sand in the low range of the pool. Add as much sand as necessary and rotate the boards until the sand is level. Once that step is done, you can begin to tamp down the sand.

What is the best base for an above ground pool?

Above ground pools require a base material to be laid for the construction of the pool. Mason sand or stone dust base material is used most often. Mason sand, also known as pool sand, will create a very smooth bottom layer and is the most popular choice.

What happens if above ground pool is not level?

If you install an above-ground pool on an uneven surface, the walls can collapse due to uneven pressure. The water will press with more force on one section of the pool than the others. ... A pool with an inflatable ring is more likely to fold under this increased pressure, but even a pool with solid side panels can fail.

How much does it cost to level ground for above ground pool?

Most will charge between $2,000 and $5,000 in labor, depending on the size and type of the pool, whether the land needed to be leveled, and whether you are having a deck built around the pool.