How much does it cost to refurbish a dresser?

How much does it cost to refurbish a dresser?

The average cost of $100 to $700 largely comes down to the type of furniture you're looking to refinish and the condition of that piece....Furniture Refinishing Price Guide.
TypePer Piece Price Range
Coffee Table$150-$250
Dresser$300-$1,000
Bed$350-$900
Pool Table$300-$500

How do you refinish an old wood dresser?

How to do it

  1. Apply Wood Stripper. Remove hardware from dresser and place in a safe spot. ...
  2. Scrape Off Paint. Once the entire surface has bubbled, use a plastic putty knife to scrape off the paint. ...
  3. Remove Residue. ...
  4. Sand Dresser. ...
  5. Stain Dresser. ...
  6. Apply Polyurethane.

How do you restore a dresser without sanding?

Here are 5 Ways To Paint Furniture Without Sanding:

  1. USE A MINERAL PAINT. Mineral paint is very similar to chalk style paints in that no prep or prime is required. ...
  2. USE MILK PAINT + BONDING AGENT. As I already mentioned, the antique desk in this post was not prep-sanded. ...
  3. USE A BONDING PRIMER. ...
  4. USE A LIQUID SANDER/DEGLOSSER.

Can I paint over finished wood?

But with careful preparations, you can paint over finished wood in your home and update its look. It requires some patient sanding and oil-based paint products to adhere to the plastic and polyurethane finishes on wood and commercial wood furniture. ... Wipe away any dust residue leftover from sanding with a tack cloth.

What is the best primer for varnished wood?

Best Primer for Varnished Wood When painting over varnished wood, my go-to primer is the oil-base product Cover Stain by Zinsser. Yes, it's oil and it smells horrible, but it seals wood to prevent bleed-through from tannin. Cover Stain is also an excellent bond coat for paint. It dries in one to two hours.

How long does varnish last?

Gloss oil-based varnish, polyurethane and Danish oil can last 10 or 20 years, though satin finishes and stains may fail sooner as pigments and flattening agents disable the driers. Water-based coatings and paints can also be viable longer than three years. Shellac, though, can go bad in under a year.

How do you tell if varnish is oil or water based?

Oil based stains are somewhat more water resistant than the water based finishes. Due to this, by sprinkling a little water onto the stained area you can tell if the stain is water or oil based. Simply wait for a minute and see if the water beads up. If it does, then you have an oil based stain.

Do wood stains expire?

According to Rockler, manufacturers of wood stains that are oil, water or solvent based say the stains have a general shelf life of three years. Three years is a good baseline if you're looking for one, but the truth is, with proper care and storage, wood stain can last much longer.

How long does unused stain last?

Oil-based stain can be kept for 1 year if the cans have been opened, but unopened cans will last 2 - 3 yrs. Water-based stain will last 1 year, if opened, and 2 years, if unopened. Oil-based varnishes will be good for 1 year, opened or unopened.

How do you get rid of stains?

7 Ways to Dispose Of Wood Stain and Paints Fast:

  1. Checking The Label. In the container of your wood stain or paint, there is a label included. ...
  2. Drying It Out. ...
  3. Throwing The Dry Waste (Empty Cans) In The Dump. ...
  4. Contact A Non-Profit Disposal Organization. ...
  5. Dropping Off At The Recycling Company. ...
  6. Disposing of Paint Rags With Caution.

How long does Thompson Water Seal last in can?

10 years

Can you put Thompson Water Seal on treated wood?

Some, like Thompson's® WaterSeal® Waterproofing Wood Protector, recommend waiting 30 days before application on new pressure treated lumber. Other products, like Thompson's® WaterSeal® Waterproofing Stain, can be applied immediately to new pressure treated lumber.

Can you use Thompson Water Seal over stained wood?

Answer: Q: Do I need to apply a clear waterproofer over my stain? Not with Thompson's® WaterSeal® exterior stains. They are specially formulated so you get unsurpassed waterproofing protection and beautiful color at the same time.

Can you apply Thompson's Water Seal to wet wood?

Thompson's® WaterSeal® Waterproofing Stains can be applied to damp wood, so you only have to wait about two hours to begin applying stain. Some of our other products require that the wood dry for 48 hours before applying a deck coating.

How many coats of Thompson Water Seal do I need?

2 coats

What is the best way to apply Thompson Water Seal?

Apply by brush, roller, dipping, or sprayer. A garden “pump-up” style sprayer is the simplest method. If over applied, remove excess before it dries by redistributing to dry areas or wiping off.

What happens if you paint wood that is wet?

In order to bond with the wood, the finish must be absorbed. If the surface is too wet an oil based finish will be rejected (oil and water don't mix). If the finish is water based the excess water in the wood grain will prevent the finish from sinking onto the surface.