How do you apply xypex concrete waterproofing?

How do you apply xypex concrete waterproofing?


  1. Apply Xypex with a semi-stiff nylon bristle brush, push broom (for large horizontal surfaces), or specialized spray equipment. ...
  2. The Xypex coating must be uniformly applied and should be just under 1/16” (1.

    How much does xypex cost?

    Compare with similar items
    This item Xypex ConcentrateDRYLOK 00917 Cement Hydraulic WTRPRF, 4-Pound, Gray
    Add to CartAdd to Cart
    Customer Rating4.

    What is the best way to waterproof concrete?

    Concrete waterproofingbest methods and materials

    1. Cold-applied polymer-modified bitumen is a sheet membrane composed of polymer materials compounded with asphalt and attached to a polyethylene sheet. ...
    2. Densifiers react with the calcium hydroxide formed in hydration, creating another by-product that increases concrete density and slows water migration.

    What is xypex admix?

    Xypex is a unique chemical treatment for the waterproofing, protection and improvement of concrete. XYPEX ADMIX C-1000 NF is added to the concrete mix at the time of batch- ing. ... These active chemicals react with the moisture in fresh concrete and with the by-products of cement hydration to cause a catalytic reaction.

    Can you paint over xypex?

    Yes. In most circumstances paint, epoxy coatings, cement parge coats, plaster and stucco can be applied over a Xypex coating. For further information concerning the interface of the Xypex coating with paint and other finishing materials, consult with a Xypex Technical Services Representative.

    What is a waterproofing admixture?

    Waterproofing admixtures are porous materials that have the ability to absorb water and water-borne contaminants. Hydrophobic and pore blocking ingredients react with products of the cement hydration process to produce a hydrophobic material which resists external water, decreasing absorption into the concrete.

    How do you waterproof wet concrete?

    Use a sealer designed for concrete moisture protection, such as an epoxy concrete sealer, which often comes in two parts that must be mixed immediately before applying. Pay special attention to the corners and edges of the floor, where cracks can let extra moisture seep in.

    How do you seal vapor barrier to concrete?

    Put up the wall plastic Stick the vapor barrier material to the foundation seal tape and then use mechanical fasteners to hold it forever. Drill holes through the plastic and through the seal tape into the block. If you drill through the seal tape you will prevent the plastic from peeling off when you remove the drill.

    How much does it cost to replace a vapor barrier?

    Average Vapor Barrier Prices A 20-millimeter thick vapor barrier ranges from $0.

    Is it worth it to encapsulate crawl space?

    Yes, it is worth and you will not regret. You can protect your crawl space from damages and health hazards, thus making it a very useful space for households. Together with crawl space insulation and vapor barrier installation, Crawl Space Encapsulation has continuously become popular in the past few years.

    How much does it cost to seal a crawl space?

    Crawl space encapsulation costs $3,000 to $8,000 on average, with prices ranging from $1,500 to $15,000. Crawl space waterproofing costs $3 to $7 per square foot for a drainage system, insulation, vapor barrier, repairs, sealing, and dehumidifier.

    Does crawl space encapsulation qualify for tax credit?

    Residents who install either of the following: 15 SEER air conditioners, sealed crawl space systems, radiant barriers in attics or add additional insulation can qualify for the 10% federal tax credit up to $ 500.