What is a brick reveal?

What is a brick reveal?

Many architects use recessed brick courses to create a reveal in masonry walls. ... The reveal typically creates a ledge that can interrupt the flow of water down the face of the wall and increase penetration as a result.

Do windows need flashing?

Flashing is an essential component of proper window installation. It catches rain that is blown at an angle onto your home. ... It's safe to assume that most window installations need some form of flashing, and most residential building codes require it.

Does window flashing go under house wrap?

The most important part of weatherproofing begins before the window goes in. After the house wrap is cut, tuck the bottom flap into the house and install sill flashing. Then fold in the sides of the house wrap, but leave the top flap alone.

What is window sill flashing?

Because proper sill flashing will protect the framing and drain any water that breaches the rest of the window assembly, such as cracks in vinyl window welds or improperly applied jamb and head flashing. ... You basically have two options: A preformed sill pan or flashing tape.

What is window flashing made of?

In modern buildings, flashing is intended to decrease water penetration at objects such as chimneys, vent pipes, walls, windows and door openings to make buildings more durable and to reduce indoor mold problems. Metal flashing materials include lead, aluminium, copper, stainless steel, zinc alloy, and other materials.

Where can you use flashing tape?

Flashing tape acts as a barrier between the wood and galvanized metal, such as joist hangers. It also helps seal deck fasteners and prevents moisture penetration, eliminates splitting from freeze and thaw, and provides a non-skid surface making it safer during installation.

What does flashing a person mean?

Flashing: "Flashing," or exhibitionism is characterized by intense, sexually arousing fantasies, urges or behaviors involving exposure of the individual's genitals to an unsuspecting stranger. The individual with this problem, sometimes called a "flasher," feels a need to surprise, shock or impress his victims.

Is flashing part of the roof?

Roof flashing is a thin material, usually galvanized steel, that professional roofers use to direct water away from critical areas of the roof, wherever the roof plane meets a vertical surface like a wall or a dormer. Flashing is installed to surround roof features, such as vents, chimneys and skylights.

What is the difference between flashing and counter flashing?

In contrast to step flashing, the next layer is installed in a continuous strip. It sits on top of the finished roof and covers the step flashing. This final layer is called counter, cover or cap flashing and commonly consists of aluminum, galvanized steel, copper, tin or even plastic.

Is counter flashing necessary?

Counter flashing is required at any point where a vertical masonry wall meets any type of roofing surface. This scenario applies to both chimneys and exterior walls on split level and other similarly designed homes. Counter flashing should also be used when roofing meets a vinyl exterior wall surface.

What is a counter flashing?

: a strip of sheet metal in the form of an inverted L built into a vertical wall of masonry and bent down over the flashing to make it watertight.

How do I know if my roofing job is bad?

The appearance test: common visual signs of a bad roofing job

  1. The roof is not uniform in appearance. ...
  2. The roof is missing shingles or has damaged shingles. ...
  3. Reusing old flashing material. ...
  4. Roofing materials were not attached correctly. ...
  5. Stains on the roof. ...
  6. Uniformity. ...
  7. Wrong nails or improper nailing techniques are used.