What does cornice mean in construction?

What does cornice mean in construction?

Cornice, in architecture, the decorated projection at the top of a wall provided to protect the wall face or to ornament and finish the eaves. The term is used as well for any projecting element that crowns an architectural feature, such as a doorway.

How do you install cove molding?

Hammer in a long skinny nail to test whether you have the correct spot. Pull out the nail and move on to the next spot. Install the corner pieces with a nail gun and 2 1/2 inch nails at an angle. Once your corner pieces are up, nail up the cove moulding placing a nail on the top and bottom where you marked your studs.

How do you install shoe molding?

Instructions

  1. Measure and Mark the First Trim Piece. ...
  2. Miter-Cut the First Molding Piece. ...
  3. Test-Fit the First Piece. ...
  4. Cut the Second Piece. ...
  5. Test-Fit the Second Piece. ...
  6. Nail the First Two Pieces, and Continue. ...
  7. Create a Return Piece to Finish the Ends. ...
  8. Measure and Mark the Return Piece.

How do you deal with shoe molding?

Lay the two pieces flat on a table with the small profiles facing each other. Make sure that the piece of shoe that won't be cut is sticking out about an inch or so further than the piece to be coped. Then pinch the pieces together, hold them steady and saw away! Click here for more coping and tight miter tips.

What is the molding on the ceiling called?

Crown. This molding is the "crowning" architectural feature of a room, as it decorates the transition between walls and the ceiling. Crown moldings, also known as cornice moldings, typically boast intricate silhouettes—although many types of crown molding exist.

Do you have to remove baseboards before installing hardwood floors?

A: It is not absolutely necessary to remove baseboards to install new hardwoods, but remember that wood floors require an expansion gap of 1/2 inch along the surrounding walls to accommodate expansion and contraction with changes in moisture and humidity.

Should I paint or put down flooring first?

The answer to the question is, “do the floors first!” Here's why: Removing and replacing flooring or carpeting is dirty work. If you paint first, and then do floors, there is a good chance that a lot of dirt, dust, sawdust or tile/stone dust will end up on your freshly painted walls and trim.

How do you fix a gap between floor and molding?

Caulking between the baseboard and floorboards will help solve gaps imperfections on the floor. Caulking the gaps in trim joints, and the gap between flooring baseboards, improve water impermeability of the floor.