What do you call the space above kitchen cabinets?

What do you call the space above kitchen cabinets?

Cabinet soffits

Should I decorate above my kitchen cabinets?

As a general rule, if you have under 2' of space above kitchen cabinetry, very tall armoires or built-ins, don't decorate the space. All too often, doing so dates you to the 1990's and the area does nothing but catch dust./span>

Should my kitchen cabinets go to the ceiling?

Ceiling Height A general rule of thumb is for wall cabinets to be mounted so the bottom edge is 54 inches above the floor, which means that an 8-foot-tall ceiling creates 42 inches of available space for wall cabinets, while a 9-foot-tall ceiling has 54 available inches./span>

Are Ikea kitchen cabinets solid wood?

Critics of IKEA kitchen cabinets like to point out that they are not "real wood" but rather are made from medium-density fiberboard (MDF). ... What some critics call a "real wood cabinet" is very likely a cabinet made from cabinet-grade (AC) plywood, not solid wood.

Does crown molding add value to a home?

Install Crown Molding Crown molding in your home compared with none in a similar home in your neighborhood could make a difference when it's time to sell. "You may not get the money back, but it's a feature that most buyers appreciate when looking for a home," says Weisbard.

Do you paint Crown Moulding before installing?

Before installing the molding, apply a couple of coats of semi-gloss paint that matches the rest of the room's trim. If you aren't using pre-primed molding, apply the primer first. It's not fun to paint molding once it is hung high on a wall, so you will want to minimize the amount of painting to be done at that time./span>

How much does base molding cost?

The national average materials cost to install base molding is $1.

Is crown molding hard to install?

The hardest part of installing crown molding is cutting the corners. You can't do it like any other trim pieces because the molding sits at an angle between the wall and the ceiling (Image 1). Using a coping saw (Image 2) is the easiest way to cut the corners because a coped joint is tighter than a mitered joint.