What is an upstand?

What is an upstand?

An upstand is an extension of the kitchen worktop which goes a short way up the wall behind the worksurface (usually 60 to 120mm).

Can you put Upstands over tiles?

An upstand is usually part of a unit "turned up" against the wall or other abutment Gemma, a splashback is an addition. Yes you can put the splashback straight on the tiles but seal the top with silicone sealant to stop any water getting down behind it.

Do you need Upstands in a kitchen?

It's worth noting that upstands only protect the lower part of your kitchen wall. This might be all you need, to stop appliances banging against the paintwork. You may want to consider decorating your walls with durable or washable paint.

What is a laminate upstand?

Comprised of a composite chipboard core and a durable laminate decorative top layer, these upstands can be cut to size easily on site, using a jigsaw or circular saw. ...

Can you use laminate as a splashback?

A splashback is a necessary addition to any kitchen, not just to protect the wall but to provide a decorative feature. For a splashback that both looks and performs well, you can't go past laminate.

Can you use laminate worktop as a splashback?

The use of kitchen splashbacks made from laminate has become one of the most popular kitchen splashbacks options. Laminate splashback panels are quick and easy to install & removes the cost and maintenance of unattractive and unsanitary grout lines.

Does Splashback go above upstand?

Personally, I think if you are having an upstand and a splashback it is entirely up to you whether you sit the glass above the upstand, or leave a gap for the glass to go in between the upstands. ... The glass splashback you choose and the worktop material should inform your choice.

Do you put Splashback on top of upstand?

The upstand stops either side of the hob then the splashback is above the hob. If that makes sense. Ours is the same as bluntness - just the splashback behind the hob and host and every where else. We have the upstand all the way around, and a mirror as a splash back sitting on top of the upstand.

Are laminate Splashbacks heat resistant?

An affordable and easy-to-clean option, laminate splashbacks are a popular choice. Available in any colour, they can add a focal point to a kitchen or blend in with units and worktops. ... While heat resistance is limited, laminate splashbacks are particularly stunning when used as a backdrop for white kitchen units.

Can I put laminate upstand behind gas hob?

Rule of thumb is you never run laminate up stands behind a gas hob. I would remove the section behind and replace it with a glass splash back or similar. The up stand might not blister now but will after a few years.

Do you need a splashback behind a kitchen sink?

Splashback is recommended if your window is behind your kitchen sink. Any type of splashback will do as it will inhibit water from to spoil or disfigure your walls. You just have to wipe off the water from the splashback to keep it clean. ... A splashback is a smooth and easily cleaned surface.

Are Splashbacks better than tiles?

Put simply, a glass splashback is very smooth and hygienic, making them a far superior alternative to traditional tiles.

What type of splashback is best?

What is the best type of splashback for you?

• What materials are available? Stainless steel, porcelain, and ceramic tiles, glass, acrylic, engineered stone (more commonly called quartz), composite, and that old favorite granite, are among the most popular. ...
• Benefits of quartz worktops. ...
• Alternative solutions.

Should Splashback match benchtop?

For a visually dramatic kitchen interior, choose a splashback material which contrasts with your kitchen bench top. ... If you want to go bold with your splashback, go for a more neutral and subtle kitchen bench top material and vice versa, so the designs don't clash.

Is Splashback cheaper than tiles?

Tilling is cheaper. Splash back is better as it has less joints, which means maintenance.

What is the cheapest backsplash?

Peel-and-stick tiles provide a cheap backsplash idea that's easier to install than traditional tile. The self-adhesive backing can be applied directly to the wall with no grout needed.

How much does a kitchen splashback cost?

COST: Expect to pay anywhere between $45 and $250 per square metre for the tiles only, depending on the material the tiles are made from, the colour or pattern, the size of the tile, plus the adhesive and grout. A tiler will charge you approximately $400 to tile a kitchen splashback in an average size kitchen.

Are glass splashbacks expensive?

Your budget will be a big decider over which material you have for your splashback, so glass being expensive may rule it out for you. However, it may be expensive, but you will be getting a high quality splashback that can last you for years.

Can I change the Colour of my glass splashback?

Back-painted glass splashbacks can be produced in a huge range of colours that can be chosen to work with the rest of your colour scheme. ... If you change your mind on the colour later on, you can simply remove and replace the glass splashback with another one.

Can you tile straight over glass splashback?

Re: Can I tile over a glass splashback? Yes.

Can you glue tiles to glass?

Clear drying glue such as Weldbond. Make sure the glue will adhere to glass. Weldbond Glue - When bonding glass tiles to a glass surface, use Weldbond sparingly if you require a crystal-clear bond. Any whiteness indicates the curing process is not complete.

How do you remove a kitchen splashback?

Removal

1. Use your wire cheese cutter to slice through the silicone sealant that attaches the splashback to the wall. ...
2. Once you reach the middle of the splashback, you can go to the opposite corner and repeat the process.
3. When the two cuts meet, use your chisel to slowly lever the splashback off the wall.

How do I fix kitchen glass splashbacks to wall?

Method

1. Clean the area of the wall where the glass splashback will be fitted.
2. Apply adhesive in 'blobs' on the rear of the splashback.
3. Gentely push the glass splashback against the wall.
4. Leave the splashback in place until the adhesive cures.
5. Seal around the edges.

What is the best tool to remove glass tile backsplash?

Tips for How to Remove Tile Backsplash in the Kitchen

• Hammer.
• Putty knife.
• Utility knife.
• Electric sander or hand sander.
• 120 grit Sandpaper.
• Drywall sanding pad.
• Drywall joint compound.

Can you repaint a glass splashback?

You can't just spray the glass splashback wherever you want. There's a high chance that you might even cause trouble with the paint as it's permanent. You wouldn't be just coloring the glass, you might even destroy a beautiful floor or wall. So, you should find a surface that won't be damaged to paint on.

What is the best paint to use on glass?

At least three types of paint may be used on glass: acrylic enamel, acrylics marked as suitable for tile or glass, and specially formulated solvent-based paints.