What is the trim under a window sill called?

What is the trim under a window sill called?

apron

What is the difference between a window sill and a window stool?

The window stool is the part of the window commonly called the window sill. ... The sill of the window is the bottom horizontal portion of the window. The stool is the more visible piece of wood, metal or stone attached to the window sill that you might sit your plants on.

What is a sill on a window?

A window sill is the bottom piece of trim, or the ledge at the bottom of the window. ... Sills are part of the window trim, which also includes the head casing, side jambs and the apron, the piece attached to the wall beneath the sill.

What is the best wood to use for a window sill?

Ponderosa pine

How do you fix a water damaged window sill?

Mix equal amounts epoxy filler and activator in a disposable container, or follow label directions for correct mixing ratios. Smooth the filler over the sill with a narrow putty knife, forcing it into any cracks or gaps. Scrape the excess filler off the sill with the putty knife to create a smooth, level surface.

How do you install MDF molding?

Start by cutting and fitting outside miters, then fit the inside corner by mitering or coping. Use a carbide-tipped power miter, saw or hand back saw with a miter box to cut miters. For splicing long runs of MDF Moulding, cut both pieces at a 45º angle and glue both ends before butting together and nailing in place.

Does MDF crown molding shrink?

With our many years of experience, we learned that all MDF mouldings do shrink on a minimal basis. Every 16 feet of moulding shrinks about 1/16", after all it is made from wood which contains moisture. The shrinkage factor is much greater for mouldings that are stored outside in the winter or in humid conditions.

Can you nail through MDF?

Without a hole, the nail will probably bend in rock-hard MDF. ... A trim nailer, on the other hand, shoots nails through MDF every time. The skinny nails will raise tiny pimples, but you can easily scrape them off with a sharp putty knife before you fill the nail holes.

How do you waterproof MDF panels?

You can also create waterproof MDF by adding a high quality wood sealant, varnish or stain or moisture-resistant paint so that your project can withstand threats of moisture and humidity. Do not use waterborne polyurethane, as it may not bind readily to the MDF's surface.

Can you use Kilz on MDF?

For sealing your MDF surfaces, we would recommend the use of our Kilz Original oil-based primer. This product should be able to properly prime and seal your project and offers the versatility of being top-coated with a latex paint.

Should MDF be primed before painting?

MDF does not require excessive preparation before you paint it. ... Make sure that you particularly focus on sanding the edges of the MDF, as rough edges will fail to soak up the paint. Sanding MDF will allow the primer and paint to bond well with the surface. Work up to light grit sandpaper that will polish off your MDF.

Can wood primer be used on MDF?

Prime the MDF with a solvent-based primer, such as Zinsser (buy online) or KILZ (buy online). Avoid water-based primer, as it may cause the wood fibers to swell, resulting in a surface that appears to have a raised grain (no matter how much effort you put into sanding).