How does a lighting control module work?

How does a lighting control module work?

Lighting controls are input/output devices and systems. The control system receives information, decides what to do with it, and then adjusts lighting power accordingly. Here we see a basic lighting circuit (switch leg). Power travels along the circuit to energize a group of lights.

What is a lighting control module?

The Lighting Control Module is a device that controls the different lighting systems on your vehicle including the headlight assembly, tail-light assembly, turning lamps, and fog-lights. The module provides a central microprocessor-based device from where all the lighting functions in your automobile can be controlled.

What is LCM switch?

Separate switches can be installed to enable the switching of each of the two channels; this could for example be used to allow the separate switching of the teaching wall lights in a classroom. ... Manual dimming is available via the master wall switch which is used to switch the LCM on and off.

What is a lighting LCM?

Lighting control modules are a new range of intelligent marshalling boxes and accessories offering a simple and easy to configure system with all the components necessary to distribute power, detector inputs and switch commands to the connected luminaires.

What is LCM module?

LCM stands for Liquid Crystal Module or LCD Module. An LCM consists of an LCD or “LCD glass” and a connected LCD controller IC. In the US, LCMs are commonly called LCDs, although this is strictly incorrect. An LCM typically also includes a backlight.

What is the difference between KNX and Dali?

KNX offers the same functionality as DALI systems but without the need to individually address each Light fixture meaning a huge cost saving in absence of specialist ballasts per fitting. Instead KNX focuses on the inputs (Switches, Sensors, Thermostats) and controls the corresponding outputs as banks of fittings.

What IEC 62386?

IEC 62386-104:2019 The IEC 62386 series specifies a bus system for control by digital signals of electronic lighting equipment. ... Where the electronic lighting equipment is covered by the scope of IEC 61347 (all parts), it is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.

What is a DALI LED driver?

DALI is the abbreviation for “Digital Addressable Lighting Interface” which is illumination control communication protocol opened home and abroad. ... DALI dimmable LED driver is dimmer and driver merged into one, widely used in LED lighting dimming.

Are all DALI drivers dimmable?

They do not directly control the energy passed to the driver. Lamps are never (directly) DALI dimmable. DALI is a standard so any DALI dimmer switch will work for a DALI dimmable driver.

What Dali stands for?

Digital Addressable Lighting Interface

What is Dali broadcast?

The DALI Broadcast Module is a compact DIN rail mounted unit with eight independent low voltage outputs each controlling up to thirty two DALI devices. ... The DALI Broadcast Module is connected to other eDIN+ devices in a system by the M-BUS network connection.

What is bus power supply?

'Bus powered' usually refers to USB connected devices which take their power from the USB connection and don't require an external power source. For example you might have a USB Hub or Repeater to extend your USB distance or number of connected devices.

What is DALI dimmable driver?

DALI (Digital Addressable Lighting Interface) These dimmer switches use a digital protocol to send a dimming control signal to a driver down separate wires to the mains supply. They do not directly control the energy passed to the driver. Lamps are never (directly) DALI dimmable.

What is KNX lighting?

KNX is technology which controls the automation of integral functions of any residential, commercial or industrial building such as HVAC, lighting systems, multimedia, security, energy management and more.