What is Fibre cement roofing?

What is Fibre cement roofing?

One such product that comes to mind is fibre cement slates, the material most commonly used in exterior siding but which is now being produced as a viable roofing option. The compound is a mixture of cement, sand, and cellulose fibres which are very versatile to natural elements as well as fire and insects.

Is Drylok extreme oil based?

Always changing with the times and giving consumers what they want, DRYLOK® Masonry Waterproofer was first formulated as a powdered masonry coating. Next, UGL introduced a ready-mixed oil base formula and than a latex base formula. ... The result was DRYLOK® Extreme Masonry Waterproofer.

Does Drylok smell?

Working with DRYLOK Masonry Waterproofer couldn't be much easier. Low-odor and fast-drying, the latex base ensures that the product cleans up easily with warm, soapy water. Once it has cured, the waterproof coating resolves to a high-gloss finish that's easy to clean, if necessary.

Is Drylok toxic?

Toxic to aquatic life with long lasting effects (GHS category 2: aquatic toxicity - acute and/or chronic). This mixture does not contain any substances that are assessed to be a PBT or a vPvB.

How long does Drylok take to dry?

2-3 hours

How do you moisture barriers to a basement wall?

But if you use fiberglass insulation batts, then a moisture barrier will prevent water and moisture from entering your walls and creating mold and mildew. According to Shannon of House Improvements, the best moisture barrier is rigid foam that is sealed with spray foam around the bottom and corner gaps.

Should you use vapor barrier on basement walls?

Vapor barriers should be located on the exterior of basement assemblies allowing inward drying to the basement space where moisture can be removed by ventilation or dehumidification.

How thick should a vapor barrier be?

6 mil

How do you build a concrete wall frame?

Walls are built from the ground up. Cut pressure treated 2" x 4" boards to length and lay them along the chalk line. Use a hammer drill with 3/16" masonry bit to drill a hole through the wood and into the concrete floor. Use an impact driver to drive a 3" Tapcon screw through the wood and into the floor.

Do you have to insulate basement walls?

Walls. Basement walls should be insulated with non-water sensitive insulation that prevents interior air from contacting cold basement surfaces—the concrete structural elements and the rim joist framing. ... The best insulations to use are foam based and should allow the foundation wall assembly to dry inwards.

What type of insulation should I use for my basement walls?

Similar to monolithic concrete, a combination of foam board and spray foam is recommended, or taped foam board to air seal and insulate the basement walls. Double brick wall with rubble fill or concrete block. Closed-cell SPF is the easiest way to provide interior insulation and air sealing.

Can I use unfaced insulation in basement walls?

With batts and rolls from R-11 to R-21, it's easy to add insulation to interior basement walls. ... For the band joist, use unfaced cut-to-fit pieces of insulation and place them snugly into the space. Cover with an interior finish material, such as drywall, as soon as the insulation is in place.