What does exclamation point on Toyota dashboard mean?

What does exclamation point on Toyota dashboard mean?

A flat tire can ruin your day, so look for the horseshoe-shaped light that features an exclamation point in the center. This warning light indicates that your Toyota's tire pressure has gotten too low, so you need to visit a dealership or service station to add air.

What does a blinking exclamation point mean on a car?

Tire pressure warning light

What does the exclamation warning sign mean?

The symbol within the pictogram is an exclamation mark. This symbol indicates that hazardous products with this pictogram can cause certain health effects for example, skin irritation, eye irritation, and/or. skin sensitization.

What does the exclamation mark mean on my Toyota Sienna?

Warning light/details: Low engine oil pressure warning light. Indicates that the engine oil pressure is too low.

What does a yellow triangle with a exclamation mark in it mean?

Warning light The yellow triangle with an exclamation mark will typically be accompanied by a message explaining what's gone wrong. Hopefully it will be self-explanatory – such as a low reservoir for the windscreen washer system.

What does the maintenance required light mean on a Toyota Sienna?

Toyota Maintenance Required Light: This light comes on to remind you to change your oil. It comes on 5,000 miles after the last time it was reset. Sometimes shops neglect to reset the maintenance-required meter if the light doesn't happen to be on yet when they are changing the oil. ...

How many miles can you drive with maintenance light on?

5,000 miles

Why does my maintenance required light flashing?

What does the maintenance required light mean? ... The light illuminates for about 3 seconds and then flashes for about 15 second every 4,500 miles after the maintenance has been reset. Most often this just means your vehicle might be due for an oil change.

How serious is the maintenance required light?

It's basically just telling you that your car will need some kind of scheduled service soon. It could be an oil change, a tuneup, or maybe you need a new timing belt. When the light begins to flash at startup, you have about 500 miles or so to go before the next scheduled service.

Is the maintenance required light the same as check engine?

Some drivers may confuse the service required or maintenance required light on the gauge cluster for the check engine light. These warning lights are unrelated. The service required light just means the car is due for an oil change or other routine care. It is not an indicator of trouble like the check engine light is.

How long can you drive when you need oil change?

Cars can generally go 5,000 to 7,500 miles before needing an oil change. Furthermore, if your vehicle uses synthetic oil, you can drive 10,000 or even 15,000 miles between oil changes.

How do I turn off the flashing maintenance light?

Turn the vehicle off. Press and hold the odometer/trip display button while turning the ignition switch to ON, or pressing the push start button once. Remember: never use the brakes or fully turn the car on! Keep holding the button down until the maintenance required light turns off.

How do you turn off the maintenance required light on a Toyota push start?

push down and old the odometer option, while simultaneously flipping the ignition back into the off position. now, you should be able to start your engine. the maintenance light should have gone off or disappeared, and is now fully reset.

What does it mean when your car says maintenance required?

This is an alert for you to make an appointment for car service because you are getting close to the 5,000-mile service interval. The maintenance required light will remain on and be solid after the mileage interval reaches 5,000 miles since the light was reset.

How do I reset my service light on my car?

DIY service indicator reset

  1. Get in your car, close all the doors.
  2. Press and hold the trip reset button on the instrument panel. ...
  3. Turn the ignition on, all the lights come on but do not switch the engine on or put your foot on any pedals.
  4. This step is where some cars may differ. ...
  5. Turn ignition off.

Can I drive my car with the service light on?

Is it safe to drive when the service required warning light is on? While your car's drivability shouldn't be affected, driving for extended periods with the light on will cause excess wear and tear on the engine. Especially with oil, not changing it at regular intervals will severely shorten your engine's lifespan.

How do I reset my dashboard after oil change?

Insert the key into the ignition and turn it to the “on” position without starting the engine. Depress the gas pedal slowly three successive times within 10 seconds. At this point, the system should have reset. You can verify by turning the ignition off and then on again.

How long does it take for a car computer to reset?

The readiness monitors will remain until the car has been driven long enough for the computer to evaluate the various system and sensors. The amount of time can vary based on the vehicle. In some cases it can take up to 100 miles for all of the computer monitors to completely reset.

How long do you have to drive to reset computer?

Maybe it cost you a fortune. So why is the light still on? Here's something you probably don't know: after clearing the car's computer you will need to drive for about 50 to 100 miles. As you drive your car the computer will monitor all the sensors and register the results.

Can you clear codes to pass emissions?

To pass an OBD-II emissions test, a vehicle must: If you clear the 'Check Engine' light, or reset the OBD-II monitors right before your emissions test, your vehicle typically will not pass because the catalyst and EVAP monitors need time to run. ... If it's not in a "ready" state, your vehicle will automatically fail.

Does disconnecting the battery clear codes?

Leaving the battery disconnected for about 15 minutes will ensure the vehicle systems will completely reset when you reconnect the battery. ... Disconnecting the battery will clear the error codes and reset the check engine light.

Should I reset computer after changing O2 sensor?

Just drive it as normal. Besides, there'* no true reset for our PCMs anyway (unless you disconnect the battery). It will take the PCM time to relearn the new values being sent from the O2 sensor. That will take about a tank of gas before you see any improvements.

How long does it take for oxygen sensor to reset?

I would say a good 50 to 100 miles. Depending on how much you drive, it will readjust by itself or get a handy scanner that can reset adaptations and you can do it right away.

Should you replace both O2 sensors at the same time?

Read the labels carefully. If your car has two catalytic converters, you have to replace 4 bad oxygen sensors because the car has two tailpipes. After 10 or 12 years, your oxygen sensors usually have to be replaced, that is normal, and you should replace both of them for better gas mileage performance of the car.

Can you drive your car with a bad oxygen sensor?

In summary, yes, you can drive with a faulty O2 sensor. But you'll want to change it immediately, because otherwise, you'll be spending more money on fuel and you risk having to spend more on a new catalytic converter as well.

What happens to a car when the oxygen sensor is bad?

If your vehicle has a bad oxygen sensor, it could run irregularly or sound rough when it idles. A faulty oxygen sensor can impact your engine's timing, combustion intervals, and other essential functions. You could also notice stalling or slow acceleration.

Does AutoZone replace oxygen sensors?

There's no way to clean or repair a clogged O2 sensor. When it's fouled or worn out, it has to be replaced and AutoZone has O2 sensors for just about every make and model.