Where do I transition flooring in doorways?

Where do I transition flooring in doorways?

As a rule you want the laminate transition to be directly under the door when the door is closed. This way you do not see the carpet from the laminate side and you don't see the laminate from carpet side. When installing laminate in hallways it is a good idea to mark all the doorways before you start the installation.

How much gap does a floating floor need?

Maintain a 1/4-inch space between the flooring and the wall. Most likely a cut will be made on the last plank of the row. Use the leftover from that cut to start the next row. That way the seams will be staggered for a cleaner, more symmetrical look.

Can you install a floating floor over a floating floor?

Home » Blog » Laminate » Can laminate be installed on top of an existing floor? The short answer to this question is 'yes'. ... More uniform flooring like concrete, vinyl, tile and plywood, are all easy to lay laminate over, but you will need to make sure an underlay has gone down before laying your new floor.

How do you fix a spongy floating floor?

Foam Away Spongy Spots. Soft spots in a laminate floor can be caused by an uneven sub-floor or improper installation of flooring underlayment. For quick repairs of soft spots in your laminate floor use an air inflation needle or a syringe (used to blow up sports balls) on a can of spray foam.

What causes soft spots in floors?

4 Answers. The cause is generally that the flooring or subfloor is not securely attached to the joists underneath. Usually this happens because the joist settle or bend over time and the flooring becomes loose or detached in spots.

How do you stop a wooden floor from bouncing?

4 Ways to Stop the Bounce

  1. Sistering. Doubling the thickness of joists by adding material to their sides increases strength and stiffness. ...
  2. Stiffening the underside. When a joist deflects, its bottom edge stretches slightly. ...
  3. Adding mid-span blocking. ...
  4. Adding a beam.

How do you get rid of bathroom floor rot?

It's not difficult to replace the floor, however, just messy.

  1. Pry up and remove trim in front of the tub, if applicable, with a pry bar or screwdriver. ...
  2. Pull the flooring back, away from the tub, well away from the rotten area. ...
  3. Locate the floor joists. ...
  4. Step on the floor and verify the rotten area's size.

How much does it cost to replace bathroom floor rot?

A damaged 5-by-5 area can cost $1,600+ to fix. Repair involves removing top flooring and replacing the damaged section. The cost of bathroom subfloor repair includes: Labor: $300-$800.