How do you install rigid foam insulation on a concrete floor?

How do you install rigid foam insulation on a concrete floor?

Apply two coats of epoxy paint over the existing slab. The area should be clear of dust and debris. Install rigid foam insulation (XPS or EPS Type II) with the seams taped (see Figure 3). Install 1x4 furring strips at 16 inches o.c. and attach them to the concrete slab through the rigid foam insulation.

What's the best way to insulate a concrete floor?

When installing insulation on top of the concrete floor, the most common method of installation is as follows. Lay the damp proof membrane onto the concrete, followed by the insulation. Then lay moisture-resistant chipboard, or a concrete screed to the top, which can then be covered by the flooring to finish.

How can I maximize the heat in my house?

So here are 10 simple tips for keeping your home warm for little or no extra cost – just in time for that severe weather warning.

  1. Use your curtains. ...
  2. Use timers on your central heating. ...
  3. Move your sofa. ...
  4. Maximise your insulation. ...
  5. Wrap up warm. ...
  6. Turn down the dial. ...
  7. Block out the draughts. ...
  8. Install thermostatic radiator valves.

Can you lose heat through glass?

How do windows lose heat? Radiation through glazing occurs is when the inner panes of glass absorb the heat generated from the internally is transmitted to the cooler outside pane via conduction. Convection inside the glazing cavity can cause heat loss when air within the cavity is warmed by the inner pane.

How do I stop Windows from heat escaping?

14 low-tech ways to keep your house warm over the winter

  1. Use tin foil. ...
  2. Thick curtains are one of the main ways to protect your house from losing heat through the windows. ...
  3. But let the sunlight in during the day. ...
  4. Double glazing is heat-efficient but it's relatively costly. ...
  5. Stop heat being lost up the chimney. ...
  6. Watch out for mini-draughts.